LENCO SB-080 - Technical Specifications; Warranty Information; Disclaimer

10
TECHNICAL SPECIFICATIONS
Power Supply
SMPS 110V-240V ~ 50/60Hz
Power output
20W*2+40W=80W R.M.S.
Driver Unit
2"*2+2.25"*2
Input impedance
4Ω*2+4Ω*2
S/N
≥ 72dB
Frequency Response
80Hz-20Khz
Distortion
</=0.5% (1K/1W)
Input Sensitivity
800mV±50mV
bluetooth Version
Version: 5.0 Range:up to 10m
Dimension (mm)
70H*78D*900L mm
GUARANTEE
Lenco offers service and warranty in accordance with the European law, which
means that in case of repairs (both during and after the warranty period) you
should contact your local dealer. Important note: It is not possible to send
products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center
in any way, the warranty expires. This device is not suitable for professional use.
In case of professional use, all warranty obligations of the manufacturer will be
voided.
DISCLAIMER
Updates to Firmware and/or hardware components are made regularly.
Therefore some of the instruction, specifications and pictures in this
documentation may differ slightly from your particular situation. All items
described in this guide for illustration purposes only and may not apply to a
particular situation. No legal right or entitlements may be obtained from the
description made in this manual.