LENCO SCD-39 USB - Power and Radio Operations; Battery and DC Input Operation; Tuning the FM Radio

5
POWER SUPPLY
 BATTERY OPERATION
1. Remove the battery compartment cover gently.
2. Install 6 x 'C' size batteries (UM-2 or equivalent) while observing
the correct polarities.
3. Replace the battery compartment cover.
NOTE:
 The AC/DC adapter must be detached from the DC IN jack of the
player for battery operation.
 Leaking batteries may damage the battery cabinet and the player
as a whole, so they should be removed from the cabinet when
becoming flat or when the player is not to be played on batteries
for some time.
 DC INPUT OPERATION
Plug the supplied adapter to the DC IN jack on the unit and the main
power.
NOTE:
If not any audio signal inputs to the unit in about one hour, the unit
will enter to standby mode automatically (except at FM radio mode).
FM RADIO
TUNING THE FM RADIO
1. The standby indicator will light once connect the main unit to the
main power. Press the ON/STANDBY button to turn the unit on
(the standby indicator will be off).
2. Press the SOURCE button repeatedly to switch the unit to radio
mode if necessary.
3. To launch the auto-searching, press and hold the SKIP/SEARCH