EasyManua.ls Logo

LENCO SCD-39 USB - Loading and Playing Discs; USB Media Operation

LENCO SCD-39 USB
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
disc; handle the disc by the edge.
Long time exposure to sunshine, high temperatures and humidity
will damage the disc. And keep storage area clean.
Avoid sticking labels on both sides of a disc. Writing with pointed
articles on the disc should be strictly avoided.
Clean the disc wiping the centre and then working out to the edge
with a dry & soft cloth or a disc brush. Avoid any cleansing lotion
or chemical eradicator.
Store them in their cases when they are not to be used.
LOAD A DISC
1. Open the CD door by the Door open area.
2. Load a disc on the disc tray with the label side facing up.
3. Close the CD door.
PLAY A DISC (CD/MP3)
1. Press the ON/STANDBY button to turn the unit on (the standby
indicator will be off).
2. Press the SOURCE button repeatedly to switch to CD mode.
3. Follow the steps above to load a disc.
4. The player begins reading disc immediately.
5. When the disc is successfully read, the playback will start from the
first track automatically.
6. Press the PLAY/PAUSE/CH+ button once to halt music playback,
press the button again to resume the normal playback; press the
STOP/CH- button to cease music playback.
EXTERNAL MEMORY MEDIA OPERATION (USB)
1. Press the ON/STANDBY button to turn the unit on (the standby

Related product manuals