S
Stephanie WalkerSep 1, 2025
What to do if the flue gas passageways of my Lennox Hearth Products Winslow (PS40) Stove are restricted?
- TTiffany SalazarSep 1, 2025
If the flue gas passageways are restricted, clean the passageways.
To Next PageTo Next PageWhat to do if the flue gas passageways of my Lennox Hearth Products Winslow (PS40) Stove are restricted?
If the flue gas passageways are restricted, clean the passageways.
What to do if the board fuse of my Lennox Hearth Products Stove is blown?
If the board fuse is blown, replace the 3 amp fuse located on the front of the control board.
What to do if the igniter fuse of my Lennox Hearth Products Winslow (PS40) is blown?
If the igniter fuse is blown, replace the 6 amp fuse located on the front of the control board.
What to do if the hopper of my Lennox Hearth Products Winslow (PS40) is empty?
If the hopper is empty, fill it.
What to do if Burn-Pot of my Lennox Hearth Products Winslow (PS40) is dirty?
If the Burn-Pot is dirty, clean it.
What should I do if the Burn-Pot of my Lennox Hearth Products Stove is dirty?
If the Burn-Pot is dirty, clean it.
What to do if the power cord of my Lennox Hearth Products Winslow (PS40) Stove is not plugged in?
If the power cord isn't plugged in, the solution is simple: plug it in.
General| Brand | Lennox Hearth Products |
|---|---|
| Model | Winslow (PS40) |
| Category | Stove |
| Language | English |
Essential rules for safe installation and operation of the pellet stove.
Critical alerts regarding potential hazards and improper use.
Required minimum distances from the stove to flammable materials.
Mandatory conditions for safe exhaust vent termination.
Guidelines and requirements for connecting the stove's vent pipe.
Procedure for starting the pellet stove ignition sequence.
