Need help?Do you have a question about the Lennox BAH045SNM and is the answer not in the manual?
General| Cooling Capacity | 45, 000 BTU/hr |
|---|---|
| Refrigerant Type | R-410A |
| Voltage | 208/230V |
| Phase | 1 |
| Sound Level (Outdoor Unit) | 76 dB |
Procedures for handling refrigerating circuits, focusing on pressure and explosion risks.
Guidelines for using approved spare parts and correct coolants for CE marking.
Procedures for checking equipment upon receipt, including damage inspection and order verification.
Details on the unit's rating plate, covering model, power, voltage, and refrigerant.
Recommendations for unit storage and keeping the maintenance key accessible.
Table detailing dimensions and weights for various BALTIC models.
Diagrams illustrating lifting methods for different unit box types and retractable lugs.
Procedures for lifting adjustable and exhaust roof curbs, including dimensions and weights.
Checklist of essential checks before commencing unit installation.
Guidelines for surface preparation, unit placement, and minimum clearances.
Procedures for installing roof mounting frames, including positioning and securing curbs.
Ensuring correct power supply and checking wire connections for the unit.
Steps for connecting displays, closing breakers, and powering up the unit.
Performing run tests, safety checks, and reverse cycle tests for proper operation.
Instructions for checking and adjusting belt tension, pulleys, and alignment.
Methods for measuring motor power and adjusting airflow for optimal performance.
Procedures for filter replacement and monitoring pressure drop.
Hydraulic connections, freeze protection, and corrosion warnings for hot water coils.
Checks, start-up, pressure adjustments, safety checks, and troubleshooting for gas burners.
Safety warnings and procedures for wiring Climatic 50 unit components.
Configuration options for digital and analog inputs/outputs for unit control.
Setting up time zones, schedules, and overrides for unit operation.
Using the DC50/DM50 display for unit monitoring, settings, and overrides.
Mapping logical addresses to DS50 values for Building Management System integration.
Diagnosing and resolving faults related to refrigerant circuits and LP/HP cut-outs.
Troubleshooting common issues with indoor/outdoor fans and electric heaters.
Diagnosing water leaks and issues with DC50/DS50 displays.
Detailed list of maintenance tasks, their frequencies, and estimated execution times.
General warranty terms, period, and conditions for repairs and spare parts.
Specific warranty details for the unit casing against corrosion.
Details of AFNOR, ISO 9001, and CE conformity certifications for the unit.
Reports on fire reaction classifications for various unit components and materials.
Certificates related to gas appliance approval and quality system approval.
To Next Page