Need help?Do you have a question about the Lennox ECOLEAN EAC Series and is the answer not in the manual?
Detailed technical specifications including cooling/heating capacity, weights, and refrigerant.
Electrical parameters like maximum power, current, and starting current for various fan units.
Lists and illustrates the various components of the EcoLean system and its versions.
Specifies the minimum and maximum operating conditions for cooling and heating modes.
Presents graphs showing pressure drop in the water system with and without a filter.
Provides data on water flow rates and available static pressure for different models.
Details safety devices, fan speed regulation, defrost cycles, and alarms for various operating modes.
Illustrates the piping configurations for cooling and heat pump units.
Provides overall dimensions and component positions for various unit models.
Lists and describes optional features and accessories for the units.
Instructions for unit placement, transport, and initial site preparation.
Guidelines on how to safely hoist and move the unit using cranes or balance beams.
Details methods for mounting units on low, medium, and high sensibility zones.
Specifies required clearances around the unit for proper air supply and performance.
Covers indoor/outdoor installation, base requirements, and handling of defrost water.
Provides wiring specifications and diagrams for connecting the unit's electrical supply.
Checklist for verifying voltage, connections, rotation, and initial compressor operation.
Method for determining correct water flow rate by measuring inlet/outlet temperature difference.
Analyzes stainless steel and copper resistance to various water chemical factors.
Recommended checks and servicing for casing, electrical, cooling circuit, and compressor.
Procedures for replacing components like compressors and handling refrigerant.
Identifies common problems, their causes, and recommended actions for troubleshooting.
To Next Page
General