Do you have a question about the Lennox eCOMFORT R32 GAC 035S and is the answer not in the manual?
Details compliance with EU directives and standards for units.
Explains warranty terms, conditions, and equipment disposal.
Illustrates and explains various warning labels and safety precautions.
Discusses flammability classes, safety, and transport of R32 refrigerant.
Provides a template for recording unit commissioning data.
Provides model codes, options, technical specifications, and fan data.
Details electrical specifications like power, current, and consumption.
Diagrams and list of unit components for different configurations.
Defines cooling and heating mode operating ranges based on temperatures.
Shows pump performance curves and hydraulic circuit details.
Graphs showing pressure drop across the unit and optional filter.
Details minimum, nominal, and maximum water flow rates and tank capacities.
Illustrates piping configurations for cooling and heat pump units.
Provides dimensional drawings for various unit models.
Guidelines for safe transport, handling, and delivery checks of the unit.
Recommendations for unit placement and site preparation.
Instructions and diagrams for safely lifting the unit.
Methods for mounting units to minimize vibration based on site sensitivity.
Tables showing weight distribution for various models and configurations.
Diagrams showing required clearances around the unit for installation.
General guidelines for installing the unit, including water circuit and defrost.
Safety and guidance for making electrical connections to the unit.
Explains the purpose and basic regulation of the Partial Heat Recovery option.
Detailed checklist for pre-commissioning checks and initial startup procedures.
Explains various electrical and control protections and features of the unit.
Refers to a separate manual for CLIMATIC control details.
How to check and set the correct water flow rate for optimal performance.
Recommendations for water analysis and treatment for the hydraulic circuit.
Outlines key points for regular preventive maintenance tasks.
A detailed plan of maintenance tasks with frequency recommendations.
Procedures for cleaning air-cooled condensers and microchannel heat exchangers.
Step-by-step guide for replacing a compressor, including safety precautions.
General recommendations and precautions for corrective maintenance, especially with R32.
Table listing common problems, their causes, and suggested actions.
Guidance on proper waste segregation and disposal of the unit at end-of-life.
Contact details for the Lennox sales office in Belgium and Luxembourg.
Contact details for the Lennox sales office in France.
Contact details for the Lennox sales office in Germany.
Contact details for the Lennox sales office in Italy.
Contact details for the Lennox sales office in the Netherlands.
Contact details for the Lennox sales office in Poland.
Contact details for the Lennox sales office in Portugal.
Contact details for the Lennox sales office in Spain.
Contact details for the Lennox sales office in Ukraine.
Contact details for the Lennox sales office in the UK and Ireland.
Contact details for Lennox Distribution for other countries.