EasyManua.ls Logo

Lennox eCOMFORT R32 GAC 035S

Lennox eCOMFORT R32 GAC 035S
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
• 5 •
Installation manual / eCOMFORT R32-MIL166E-0222 - 09/2022
WARRANTY
The warranty of the chillers is subject to the warranty denitions as agreed upon in the order.
It is expected that the design and installation of the unit utilises good working practices.
The warranty will be legally null and void if:
Service and maintenance have not been executed in accordance with the regulations; repairs have not been carried out
by LENNOX personnel or have been implemented without prior written permission by LENNOX.
Modications have been made to the equipment without prior written permission by LENNOX.
Settings and protections have been modied without prior written permission by LENNOX.
Non-original or other than the prescribed refrigerants or lubricants are used.
The equipment has not been installed and/or connected in accordance with the installation instructions.
The equipment is being used improperly, incorrectly, negligently or not in accordance with its nature and/or purpose.
A ow protection device is not tted.
In these circumstances LENNOX is indemnied from any product liability claims from third parties.
In the event of a warranty claim the machine serial number and LENNOX order number must be quoted.
In the absence of any other written agreement (e.g. local regulations), the guarantee shall only apply to design faults which occur within
the warranty period.
The warranty will only apply if a maintenance contract has been signed, starting from the date of commissioning, and if the mainte-
nance contract has actually been performed.
The maintenance contract must be made with a specialist, competent company.
The sole e󰀨ect of any repair, modication or replacement of an item during the warranty period must be to extend the material’s
warranty period.
Maintenance must be carried out in accordance with regulations.
In addition to annual checks, safety accessories for non-toxic uids must be requalied (calibrated or replaced) every 12 months,
according to the current regulations.
If a spare part is supplied after the expiry of the warranty period, it shall be guaranteed for a period equal to the initial warranty
period and will be subject to the same conditions.
We recommend for a contract four inspections per year (every three months), before the start of each season, in order to check the
operation of the equipment in the various operating modes.
DISPOSAL OF THE EQUIPMENT:
Equipment shut-down and recuperation of oil and coolant must be carried out by qualied personnel conform to the recommendations
of standard.
All elements in the refrigeration system such as refrigerant, oil, coolant, lters, dryers and insulating materials must be recuperated, re-
used and/or disposed of in a correct manner, according to the current regulations. No materials may be discarded into the environment.
The corresponding organization in each country will be in charge of collecting, decontaminating and recovering the eliminated mate-
rials, ensuring that each step is carried out in full compliance with current regulations.
DO NOT CONFUSE THE WARRANTY WITH MAINTENANCE.

Related product manuals