IGNITOR
Ground
Electrode
FIGURE 27
11-Flame Sensors
-
-
-
-
-
FIGURE 28
II-PLACEMENT AND INSTALLATION
-
-
-
III-CHARGING
-
NOTE - System charging is not recommended below 60F,
In temperatures below 60F, the charge must be weighed
into the system.
IMPORTANT - Charge unit in normal cooling mode.
1 -
2 -
•
•
-
perature Check
Note - Pressures are listed for sea level applications.
1 -
•
-
tem.
•
2 -
To Next Page
Loading...
Need help?
General