To Next PageTo Next PageWhat to do if my Lennox GCWB95W-150 shows a gas valve command fault?
If your Lennox Boiler indicates a gas valve command fault, first verify all cables. If the problem persists, replace the PCB. If the issue continues, contact an authorized service center for assistance.
How to troubleshoot a gas valve connection fault in my Lennox GCWB95W-150?
To troubleshoot a gas valve connection fault, check the cable between the PCB and the gas valve, and also inspect the gas valve plug.
What to do if my Lennox GCWB95W-150 displays a Domestic Hot Water NTC sensor fault?
If you encounter a Domestic Hot Water NTC sensor fault, check both the sensor and its cable for any issues.
What should I do if my Lennox Boiler shows a Return NTC sensor fault?
If your Lennox Boiler is displaying a Return NTC sensor fault, the first step is to check the sensor and its cable to ensure they are functioning correctly.
What to do if my Lennox GCWB95W-150 Boiler has a Central Heating NTC sensor fault?
If your Lennox Boiler indicates a Central Heating NTC sensor fault, you should check the sensor and its cable for any damage or loose connections.
What should I do if my Lennox GCWB95W-150 displays a Flue NTC heat exchanger sensor fault?
If your Lennox Boiler shows a Flue NTC heat exchanger sensor fault, check the sensor and its cable to ensure they are in good condition.
What to do if the outdoor sensor on my Lennox GCWB95W-150 Boiler is faulty?
If you suspect a fault with the outdoor sensor on your Lennox Boiler, check the sensor itself and its cable for any visible damage or loose connections.
General| Model | GCWB95W-150 |
|---|---|
| Efficiency | 95% AFUE |
| Input BTU/h | 150, 000 |
| Output BTU/h | 142, 000 |
| Configuration | Wall-mounted |
| Type | Gas Fired Water Boiler |
| Fuel Type | Natural Gas |
| Vent Type | Direct Vent |
Covers service by qualified agents, ceramic fiber insulation hazards, and essential first aid.
Crucial safety warnings before operating the appliance to prevent fire or explosion.
Detailed instructions for safely starting the boiler, including gas shutoff procedures.
What to do if you smell gas to ensure safety and prevent hazards.
Explains buttons, symbols, and their functions on the boiler control panel.
Comprehensive list of error codes and methods for resetting the boiler.
