Do you have a question about the Lennox HS29-042 and is the answer not in the manual?
Details HS29 condensing unit capacities, system matching for warranty, and potential issues from misapplication.
Describes the control box, field wiring, contactors, dual capacitors, transformers, and start capacitors.
Explains rotary, reciprocating, and scroll compressor types, their operation, and key features.
Detailed explanation of the scroll compressor's unique design, operation, efficiency, and critical vacuum handling precautions.
Information on field refrigerant piping, liquid/suction lines, and Lennox line set selection for proper installation.
Instructions on accessing and operating liquid/suction line service valves, including critical safety warnings and procedures.
Procedures for safely pumping down the system, performing leak tests with nitrogen, and checking connections.
Detailed steps for evacuating the system to the required vacuum level and methods for refrigerant charging.
Steps for cleaning and inspecting the outdoor unit's condenser coil and connecting lines for oil leaks.
Instructions for cleaning the indoor coil, checking connections, and cleaning the condensate line.
Wiring diagram and sequence of operation for HS29-1 single-phase units with reciprocating or rotary compressors.
Wiring diagram and sequence of operation for HS29-2 and -3 single-phase units with reciprocating or rotary compressors.
Wiring diagram and sequence of operation for HS29 three-phase units, covering all compressor types.
Wiring diagram and sequence of operation for HS29-1 single-phase units with scroll compressors.
Wiring diagram and sequence of operation for HS29-2 and -3 single-phase units with scroll compressors.