106
Installation and Maintenance
Service Manual
ProcedureSteps
3.Remove front grille
2.Remove top cover
Remove connection screws connecting the
top cover plate with the front panel and the
right side plate,and then remove the top
cover.
Remove connection screws between the
front grille and the front panel. Then remove
the front grille.
top cover
front grille
cable cross plate
sub-assy
valve cover
1.Remove cable cross plate sub-assy
and valve cover
Remove the screws fixing cable cross plate
sub-assy and then remove the cable cross plate
sub-assy.
Remove the screws fixing valve cover and then
remove the valve cover.
12K
NOTE:Take heat pump for example.
To Next Page
Loading...
