Need help?Do you have a question about the Lennox LI036HI-180P432 and is the answer not in the manual?
General| Energy Efficiency Ratio (EER) | 11.5 |
|---|---|
| Seasonal Energy Efficiency Ratio (SEER) | 18.0 |
| Compressor Type | Inverter |
| Refrigerant Type | R-410A |
| Voltage | 208/230 V |
| Phase | 1 |
| Cooling Capacity | 36000 BTU/h |
| Heating Capacity | 36000 BTU/h |
| Sound Level (Outdoor Unit) | 56 dB(A) |
Clarifies the meaning of DANGER, WARNING, CAUTION, and NOTICE symbols used throughout the manual.
Lists essential safety guidelines for operating, maintaining, and installing the air conditioner to prevent injury.
Identifies and labels the key components of the indoor air conditioning unit.
Identifies and labels the key components of the outdoor air conditioning unit.
Details the functions of each button and the meaning of icons displayed on the remote controller.
Explains how to use the remote controller for various modes like AUTO, COOL, DRY, FAN, and HEAT.
Describes functions like Timer settings, Lock, and combination button operations for enhanced control.
Provides a step-by-step operation guide and instructions for replacing remote control batteries.
Describes how to use the auxiliary button for operation when the remote controller is unavailable.
Details how to clean the indoor unit surface and the air filter for optimal performance and longevity.
Lists essential checks to perform after installation and during regular use to ensure proper functioning.
Guides users through identifying common operational issues and providing practical troubleshooting steps.
Lists specific error codes displayed by the unit and provides their meanings and troubleshooting actions.
Provides the dimension diagram, lists installation tools, and guides location selection.
Details safety precautions, wiring specifications, grounding requirements, and electrical connection procedures.
Step-by-step instructions for mounting the indoor unit, preparing piping holes, and connecting pipes and wires.
Guides on fixing the outdoor unit support, connecting drain joints, securing the unit, and connecting pipes and wires.
Explains the process of using a vacuum pump and methods for detecting refrigerant leaks.
Outlines the final checks required after installation and the procedure for conducting a test operation.
Details pipe lengths, height differences, refrigerant charging, and the correct pipe expanding method.
Introduces the wired controller, its display, buttons, installation, and dismantlement procedures.
Explains how to operate the wired controller, set modes, fan speed, timers, and other advanced functions.
Lists error codes displayed on the wired controller and provides their meanings and troubleshooting steps.
To Next Page