Need help?Do you have a question about the Lennox MPGA 075 B3 and is the answer not in the manual?
Guidelines for choosing an appropriate location for furnace installation.
Minimum required distances between the furnace and adjacent construction.
Hazards and substances to avoid in combustion air to prevent furnace damage.
Guidelines for ensuring sufficient air for safe furnace operation and building environment.
Advice on connecting supply and return ducts to the furnace.
Steps to modify the furnace for downflow installation configuration.
Inspection steps for existing vent systems before furnace installation.
Clearances required for vent terminals when using horizontal venting.
Rules for common venting and terminating vent systems.
Step-by-step process of the furnace's heating cycle and control functions.
How to adjust the manifold pressure for optimal gas delivery.
Annual inspection of key combustion components for safety and performance.
Detailed steps for removing and replacing the manifold or burner assembly.
Steps for initiating furnace operation, including gas control settings.
Instructions for cleaning the furnace cabinet.
Precautions regarding insulation clearance around the furnace.
Recommended periodic checks of furnace components.
Importance of adequate combustion air and avoiding obstructions.
Requirements for proper venting and structural support of the furnace.
To Next Page
General