13
www.lennoxcommercial.com
You can also save a unit profile which can be uploaded to another similar unit.
• To save or upload a unit profile, insert a USB memory stick in the
USB port
• Press enter when the screen reads then scroll
down to and press enter
• The controller will automatically check to see if there is a profile that
matches the unit
• If there is a profile saved to the memory stick with a matching cat
number, the controller will ask to upload it
• This will instantly upload all setpoints to the unit that are saved to
the profile
• If there is no profile saved, the controller will ask if you want to save
the unit’s profile
USB
PROFILES
13
Navigation Display Service Data Settings
SmartWire
™
System
To Next Page
Loading...
