EasyManuals Logo

Lenovo 7390 User Manual

Lenovo 7390
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
Installing memory
Your computer has two connectors for installing DIMMs that provide up to a
maximum of 4.0 GB of system memory.
When installing memory modules, the following rules apply:
v Use 1.8 V, 240-pin double data rate 2 synchronous dynamic random access
memory (DDR2 SDRAM).
v Use 256 MB, 512 MB, 1.0 GB, or 2.0 GB memory modules in any combination up
to a maximum of 4.0 GB.
To
install a memory module:
1. Remove the computer cover. See “Removing the cover” on page 20.
2. Access the system board. See “Accessing system board components” on page
22.
3. Remove any parts that might prevent access to the memory connectors.
4. Locate the memory connectors. See “Identifying parts on the system board” on
page 24.
5. Open the retaining clips.
6. Position the memory module over the memory connector. Make sure that the
notch 1 on the memory module aligns correctly with the connector key2 on
the system board. Push the memory module straight down into the connector
until the retaining clips close.
26 User Guide

Table of Contents

Other manuals for Lenovo 7390

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lenovo 7390 and is the answer not in the manual?

Lenovo 7390 Specifications

General IconGeneral
BrandLenovo
Model7390
CategoryDesktop
LanguageEnglish

Related product manuals