1010Basecoverassembly
Removalstepsofthebasecoverassembly
Removethescrews1and2thatsecurethebasecoverassembly.Removethebasecoverassembly3.
StepScrew(quantity)Color
TorquePNnumber
SCREWM2*6mm,flat-head,nylok-coated(6)
Black
1.85+/-
0.15kgf-cm
SS10H52675
1
SCREWM2*4mm,flat-head,nylok-coated(4)
Black
1.85+/-
0.15kgf-cm
SS10H54968
Applyinglabelstothebasecoverassembly:
Thenewbasecoverassemblyisshippedwithakitcontaininglabelsofseveralkinds.Applythoselabels
whenyoureplacethebasecoverassembly.Forthelabelsthatarenotshippedwiththenewbasecover
assembly,peelthemfromtheoldbasecoverassembly,andadherethemtothenewone.
Note:IftheCertificateofAuthenticity(COA)label(b)isattachedtoareplacedpart,returnthereplacedpart
tothecustomer,orprovidealettertothecustomerstatingtheoriginallabelpartnumber,serialnumber,
andproductkey.
ThefollowingillustrationshowsthelocationofeachlabelonE31-80.
52HardwareMaintenanceManual