Need help?Do you have a question about the Lenovo ideacentre Y800 and is the answer not in the manual?
Provides essential safety guidelines and warnings for system operation.
Outlines general safety rules and precautions to ensure a safe working environment.
Details critical safety measures related to electrical hazards and working with live circuits.
Provides a checklist for inspecting the computer for potentially unsafe conditions.
Explains procedures to protect sensitive electronic components from electrostatic discharge (ESD) damage.
Specifies requirements and guidelines for proper electrical grounding of the system.
Presents various safety notices, including handling batteries and laser products.
Lists the physical and environmental specifications for the ideacentre Y700-900 computer.
Describes how to access and launch the Lenovo BIOS Setup Utility program.
Explains how to navigate and modify system configuration settings within the BIOS.
Details the process of setting, changing, and deleting BIOS passwords for security.
Provides recommendations for creating strong and secure passwords for BIOS access.
Covers setting, changing, and deleting administrator passwords for BIOS configuration access.
Explains how to set, change, or delete the power-on password for system startup.
Guides on how to enable or disable various hardware devices through the BIOS setup.
Describes how to choose the primary boot device for the computer.
Details the procedures for saving or discarding changes and exiting the BIOS setup.
Lists common symptoms and actions for diagnosing and resolving hard disk boot errors.
Provides troubleshooting steps and FRU replacements for power supply issues.
Explains Power-On Self-Test (POST) error messages and their descriptions/actions.
Outlines a systematic approach to diagnose issues when the cause is not immediately apparent.
Illustrates and lists the main internal components of the computer.
Shows the locations of various connectors and components on the computer's system board.
Covers essential pre-disassembly steps and general safety precautions before hardware replacement.
Provides instructions on how to safely remove the computer's outer cover.
Guides on how to remove and install a memory module into the computer.
Details the procedure for replacing the computer's hard disk drive.
Explains the steps to remove and install the computer's power supply unit.
Details the procedure for removing and installing the computer's central processing unit (CPU).
Details the procedure for removing and installing the computer's motherboard.
Lists field replaceable units (FRUs) with part numbers, descriptions, and basic names.
Offers supplementary information for service representatives, covering power management features.
To Next Page
General