Power supplies
The server supports up to two redundant hot-swap power supplies, providing N+N redundancy. Most
standard models come with two power supplies (Table 2).
The MAX5 power subsystem consists of two hot-pluggable 675 W power supplies, designed for N+N (fully
redundant) hot-swap operation. The MAX5 V1 has one power supply standard and a second optional
power supply for redundancy. See the MAX5 section for details. The MAX5 V2 has two power supplies
installed. No further power supplies are needed or available.
Table 17. Power supplies
Part number Feature
code
Description Maximum
supported
59Y6139 2111 1975 W Power Supply (x3850 X5) 2 (1 or 2 standard)
60Y0332 4782 High Efficiency 675W Power Supply
For second power supply for MAX5 V1
1 (MAX5 V1 only)
An AC power supply ships standard with one 2.8 m C13 - C14 power cord.
Integrated virtualization
The server supports VMware ESXi installed on a USB memory key. The key is installed in a USB socket
inside the server. The following table lists the virtualization options.
Table 18. Virtualization options
Part number Feature
code
Description Maximum
supported
41Y8298 A2G0 Blank USB Memory Key for VMware ESXi Downloads 1
41Y8296 A1NP USB Memory Key for VMware ESXi 4.1 Update 1 1
41Y8300 A2VC USB Memory Key for VMWare ESXi 5.0 1
41Y8307 A383 USB Memory Key for VMware ESXi 5.0 Update1 1
41Y8311 A2R3 USB Memory Key for VMWare ESXi 5.1 1
41Y8382 A4WZ USB Memory Key for VMware ESXi 5.1 Update 1 1
41Y8385 A584 USB Memory Key for VMWare ESXi 5.5 1
Remote management
To Next Page
Loading...
