Lenovo System x3850 X6 - Page 353

Appendix A. LCD display panel messages
This section provides descriptions and actions for the messages that might display in the LCD system
information display panel on the server.
The LCD system information display panel on the server provides messages about the server progress
during POST and the actions plan to follow and correct the problem. Follow the suggested actions in the
order in which they are listed in the Action column until the problem is solved. For more information about the
LCD display panel, see “LCD system information display panel” on page 27.
The following table lists the messages that might display in the LCD display panel on the server.
Table 63. LCD display panel messages
Message
Description
Amount of time before
the system timeout if no
activity
Action
SYS OFF/BLK PWR The system is off; no
power permissions
granted by IMM.
-
Normal. No action is
required.
SYSTEM OFF The system is off.
-
Normal. No action is
required.
UEFI: AUTH USER
Authenticating the
user.
-
Normal. No action is
required.
UEFI: F1 SETUP
Waiting at F1 menu.
-
Normal. No action is
required.
UEFI: BOOT DIAGS
The system is
booting to pDSA
-
Normal. No action is
required.
UEFI: BOOT UEFI Control has been
passed to the
operating system
bootloader.
-
Normal. No action is
required.
OPERATING SYS.
UEFI has passed
control to the
operating system.
-
Normal. No action is
required.
UEFI: CSM INIT Preparing for legacy
boot.
-
Normal. No action is
required.
UEFI: CSM DONE
Ready to boot
legacy.
-
Normal. No action is
required.
IMM: READY IMM is done
loading.
-
Normal. No action is
required.
Power Fault XXh A system power
fault has occurred.
Immediately
1. Identify the FRU
associated with the
VRD.
2. Check the IMM log.
© Copyright Lenovo 2014, 2019 339