Lenovo System x3850 X6 - Page 354

Table 63. LCD display panel messages (continued)
Message Description
Amount of time before
the system timeout if no
activity
Action
SYSTEM ON
The system is on.
The microprocessor
has not attempted
to fetch from UEFI
ROM.
After 1 minute Inspect the
microprocessor (s).
WAITING ON UEFI UEFI has not
fetched code.
After 1 minute
1. Restart the server.
2. Flash the UEFI
firmware.
3. Clear CMOS.
UEFI: MEASUR.IMG
UEFI is running. After 2 minutes
1. Restart the server.
2. Flash the UEFI
firmware.
3. Clear CMOS.
UEFI: SIG.CHK.PR Verifying the
signature of the
primary bank.
After 2 minutes Flash the UEFI primary
bank.
UEFI: SIG.CHK.BK Verifying the
signature of the
backup bank.
After 2 minutes Flash the UEFI backup
bank.
UEFI: UPDATE PRI UEFI is updating the
primary bank.
After 2 minutes
1. Restart the server.
2. Flash the UEFI
firmware.
3. Clear CMOS.
UEFI: UPDATE BKP UEFI is updating the
backup bank.
After 2 minutes
1. Restart the server.
2. Flash the UEFI
firmware.
3. Clear CMOS.
UEFI: END SEC
UEFI is running. After 2 minutes
1. Restart the server.
2. Flash the UEFI
firmware.
3. Clear CMOS.
UEFI: START PEI
UEFI is running. After 2 minutes
1. Restart the server.
2. Flash the UEFI
firmware.
3. Clear CMOS.
UEFI: MEM INIT
MRC is running. After 2 minutes
1. Inspect the memory
in the compute
books.
2. Check the IMM log.
340 System x3850 X6 and x3950 X6 Installation and Service Guide