3 for the front I/O panel assembly
4 for LCD display panel
– <fru_number> is a 7–character FRU part number
Note: The Lenovo server component FRU part numbers remain unchanged: they are
the same FRU numbers that were used in the IBM server.
m. Add a command line to the batch file for each Lenovo server component FRU part
number, following the form:
asu64 set VPD.CompVPD_FRUNumber.# “<fru_number>[sp][sp][sp][sp][sp]” --host
<IMM_IP> --user <IMM_userid> --password <IMM_password>
where:
– # is the component numeric identifier:
1 for the 4–socket midplane
3 for the front I/O panel assembly
4 for LCD display panel
– <fru_number> is the first 7–characters of a 12–character field, followed by five
padding spaces, for the component FRU part number (the Lenovo server and the
IBM server use the same component FRU numbers)
– <IMM_IP> is the IMM IP address
– <IMM_userid> is the IMM user name
– <IMM_password> is the IMM password
n. Locate the IBM server component serial numbers in the <serial>_component.txt file.
There are multiple component serial numbers in the following format:
VPD.CompVPD_SerialNumber.# <s/n>
where:
– # is the component numeric identifier:
1 for the 4–socket midplane
3 for the front I/O panel assembly
4 for LCD display panel
Note: A serial number for the front I/O panel assembly (3) is not required and
might not be listed.
– <s/n> is a 6–character component serial number
Notes:
– The Lenovo server component serial numbers remain unchanged: they are the
same serial numbers that were used in the IBM server.
– The serial number is the last six characters of the 11S barcode. In the following
example, the serial number is shown in bold:
11S12X4567YJ1105A34567
o. Add a command line to the batch file for each Lenovo server component serial
number, following the form:
asu64 set VPD.CompVPD_SerialNumber.# <s/n> --host <IMM_IP> --user <IMM_userid>
--password <IMM_password>
where:
12
System x3850 X6 and x3950 X6 IBM to Lenovo Upgrade Installation Guide
To Next Page
Loading...
