Lenovo ThinkServer sd350
Product Guide
The Lenovo ThinkServer sd350 is an ultradense and economical two-socket server in a 0.5U rack form
factor. With four sd350 servers installed in the ThinkServer n400 enclosure, you have an ideal high-density
2U four-node (2U4N) platform for enterprise and cloud workloads.
2U4N systems have gained popularity in a variety of data centers, from large enterprises to service
providers, because their small footprint and inherent density make them ideal for building solution-based
appliances at a low cost. The combination of the Lenovo ThinkServer sd350 and n400 Enclosure is built to
deliver these types of solutions.
Suggested use: Cloud, MSP, CSP, HPC, hyperconverged solutions, branch office or remote office needs
The following figure shows the ThinkServer sd350 server.
Figure 1. The ThinkServer sd350 server
Did you know?
The sd350 supports two Intel Xeon E5-2600 v4 processors, each with up to 20 cores and a 135W TDP
rating. This means you can fit 160 cores in 2U of rack space.
These servers are also fully managed systems with IPMI 2.0 support for remote management via a
dedicated RJ45 port, xCAT support, planned Lenovo XClarity support,and an AMI BIOS and BMC code
stack.
To Next Page
Need help?
General