1. Reseat SMM module.
2. If 1V15_SENSE error is still asserted, replace SMM module.
• 02010220: VBAT_SENSE: Voltage sensor, critical event was asserted, reading value %V (Threshold
%V)
Asserted when voltage sensed on coin battery output voltage is lower than lower critical threshold
Severity: Critical
User Action:
Replace the coin battery on SMM.
• 0201071A: 12V_SENSE: Voltage sensor, warning event was asserted, reading value %V (Threshold
%V)
Asserted when voltage sensed on 12V power rail is higher than upper non-critical threshold.
Severity: Informational
User Action:
1. Reseat SMM module.
2. If 12V_SENSE warning is still asserted, replace SMM module.
• 0201071B: 3V3_SENSE: Voltage sensor, warning event was asserted, reading value %V (Threshold
%V)
Asserted when voltage sensed on 3.3V power rail is higher than upper non-critical threshold.
Severity: Informational
User Action:
1. Reseat SMM module.
2. If 3V3_SENSE warning is still asserted, replace SMM module.
• 0201071C: 5V_SENSE: Voltage sensor, warning event was asserted, reading value %V (Threshold
%V)
Asserted when voltage sensed on 5V power rail is higher than upper non-critical threshold.
Severity: Informational
User Action:
1. Reseat SMM module.
2. If 5V_SENSE warning is still asserted, replace SMM module.
• 0201071D: 2V5_SENSE: Voltage sensor, warning event was asserted, reading value %V (Threshold
%V)
Asserted when voltage sensed on 2.5V power rail is higher than upper non-critical threshold.
Severity: Informational
User Action:
1. Reseat SMM module.
2. If 2V5_SENSE warning is still asserted, replace SMM module.
• 0201071E: 1V2_SENSE: Voltage sensor, warning event was asserted, reading value %V (Threshold
%V)
Asserted when voltage sensed on 1.2V power rail is higher than upper non-critical threshold.
Severity: Informational
6
ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute Node
Messages and Codes Reference
To Next Page
Loading...
