User Action:
Information only; no action is required
• FQXSPPP4043I: Management Controller [arg1] reset was initiated by PRESET.
Management Controller reset was initiated by PRESET
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0187
User Action:
Information only; no action is required
• FQXSPPP4044I: Management Controller [arg1] reset was initiated by CMM.
Management Controller reset was initiated by CMM
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0188
User Action:
Information only; no action is required
• FQXSPPP4045I: Management Controller [arg1] reset was initiated by XCC firmware.
Management Controller reset was initiated by XCC firmware
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0189
User Action:
Information only; no action is required
• FQXSPPP4047I: Management Controller [arg1] reset was initiated by user [arg2].
This message is for the use case where a Management Controller reset is initiated by a user.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0021
User Action:
Information only; no action is required
108
ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute
Node Messages and Codes Reference
To Next Page
