EasyManua.ls Logo

Lenovo ThinkSystem D2 - Page 12

Lenovo ThinkSystem D2
226 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Asserted when voltage sensed on 1.2V power rail is higher than upper critical threshold.
Severity: Critical
User Action:
1. Reseat SMM module.
2. If 1V2_SENSE error is still asserted, replace SMM module.
0201091F: 1V15_SENSE: Voltage sensor, critical event was asserted, reading value %V (Threshold
%V)
Asserted when voltage sensed on 1.15V power rail is higher than high critical threshold.
Severity: Critical
User Action:
1. Reseat SMM module.
2. If 1V15_SENSE error is still asserted, replace SMM module.
04010010: FAN_TACH_1A: Fan sensor, warning event was asserted, reading value %RPM
(Threshold %RPM)
Asserted when Fan tach reading is below warning threshold RPM.
Severity: Warning
User Action:
1. If warning is not de-asserted after several minutes, check all five fans are installed.
2. Reseat fan module a couple of times. If error still persist, replace fan module.
04010011: FAN_TACH_1B: Fan sensor, warning event was asserted, reading value %RPM
(Threshold %RPM)
Asserted when Fan tach reading is below warning threshold RPM.
Severity: Warning
User Action:
1. If warning is not de-asserted after several minutes, check all five fans are installed.
2. Reseat fan module a couple of times. If error still persist, replace fan module.
04010012: FAN_TACH_2A: Fan sensor, warning event was asserted, reading value %RPM
(Threshold %RPM)
Asserted when Fan tach reading is below warning threshold RPM.
Severity: Warning
User Action:
1. If warning is not de-asserted after several minutes, check all five fans are installed.
2. Reseat fan module a couple of times. If error still persist, replace fan module.
04010013: FAN_TACH_2B: Fan sensor, warning event was asserted, reading value %RPM
(Threshold %RPM)
Asserted when Fan tach reading is below warning threshold RPM.
Severity: Warning
User Action:
1. If warning is not de-asserted after several minutes, check all five fans are installed.
2. Reseat fan module a couple of times. If error still persist, replace fan module.
8
ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute Node
Messages and Codes Reference

Related product manuals