Table 3. Events organized by severity (continued)
Event ID
Message String Severity
FQXSFMA0007I [arg1] DIMM number [arg2] has been replaced. [arg3] Informational
FQXSFMA0008I DIMM [arg1] POST memory test failure has been recovered. [arg2] Informational
FQXSFMA0009I Invalid memory configuration for Mirror Mode has been recovered.
[arg1]
Informational
FQXSFMA0010I Invalid memory configuration for Sparing Mode has been recovered.
[arg1]
Informational
FQXSFMA0011I Memory population change detected. [arg1] Informational
FQXSFMA0012I The PFA of DIMM [arg1] has been deasserted. Informational
FQXSFMA0013I Mirror Fail-over complete. DIMM [arg1] has failed over to to the
mirrored copy. [arg2]
Informational
FQXSFMA0014I Memory spare copy initiated. [arg1] Informational
FQXSFMA0015I Memory spare copy has completed successfully. [arg1] Informational
FQXSFMA0026I DIMM [arg1] Self-healing, attempt post package repair (PPR) at Rank
[arg2] Sub Rank [arg3] Bank [arg4] Row [arg5] on Device [arg6]. [arg7]
Informational
FQXSFMA0029I The PFA of DIMM [arg1] has been deasserted after applying PPR for
this DIMM. [arg2]
Informational
FQXSFMA0030I A correctable memory error has been detected on DIMM [arg1]. [arg2] Informational
FQXSFPU0020I The UEFI firmware image capsule signature is invalid. Informational
FQXSFPU0021I The TPM physical presence state has been cleared. Informational
FQXSFPU0023I Secure Boot Image Verification Failure has been cleared as no failure
in this round boot.
Informational
FQXSFPU4034I TPM Firmware recovery is finished, rebooting system to take effect. Informational
FQXSFPU4038I TPM Firmware recovery successful. Informational
FQXSFPU4041I TPM Firmware update is in progress. Please DO NOT power off or
reset system.
Informational
FQXSFPU4042I TPM Firmware update is finished, rebooting system to take effect. Informational
FQXSFPU4044I The current TPM firmware version could not support TPM version
toggling.
Informational
FQXSFPU4046I TPM Firmware will be updated from TPM1.2 to TPM2.0. Informational
FQXSFPU4047I TPM Firmware will be updated from TPM2.0 to TPM1.2. Informational
FQXSFPU4049I TPM Firmware update successful. Informational
FQXSFPU4080I Host Power-On password has been changed. Informational
FQXSFPU4081I Host Power-On password has been cleared. Informational
FQXSFPU4082I Host Admin password has been changed. Informational
FQXSFPU4083I Host Admin password has been cleared. Informational
FQXSFPU4084I Host boot order has been changed. Informational
FQXSFPU4085I Host WOL boot order has been changed. Informational
154 ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute
Node Messages and Codes Reference
To Next Page
Loading...
