Severity: Critical
User Action:
1. Ensure all five fans are installed.
2. Reseat the indicated missing fans.
3. Replace the indicated missing fans.
• 040800B1: FAN2_NO_PRESENT: Fan sensor, Device Removed / Device Absent was asserted.
Indicated fan module is missing from the fan slot
Severity: Critical
User Action:
1. Ensure all five fans are installed.
2. Reseat the indicated missing fans.
3. Replace the indicated missing fans.
• 040800B2: FAN3_NO_PRESENT: Fan sensor, Device Removed / Device Absent was asserted.
Indicated fan module is missing from the fan slot
Severity: Critical
User Action:
1. Ensure all five fans are installed.
2. Reseat the indicated missing fans.
3. Replace the indicated missing fans.
• 040800B3: FAN4_NO_PRESENT: Fan sensor, Device Removed / Device Absent was asserted.
Indicated fan module is missing from the fan slot
Severity: Critical
User Action:
1. Ensure all five fans are installed.
2. Reseat the indicated missing fans.
3. Replace the indicated missing fans.
• 040800B4: FAN5_NO_PRESENT: Fan sensor, Device Removed / Device Absent was asserted.
Indicated fan module is missing from the fan slot
Severity: Critical
User Action:
1. Ensure all five fans are installed.
2. Reseat the indicated missing fans.
3. Replace the indicated missing fans.
• 080701AA: PSU_POLICY_LOST: Power Supply, transition to Non-Critical from OK was asserted.
The configured PSU policy has been disabled
Severity: Warning
User Action:
1. Check the inventory power of all powered on nodes to see if the summary over current power bank
– Replace the node with light configuration
12
ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute Node
Messages and Codes Reference
To Next Page
Loading...
