Information only; no action is required.
• FQXSPSS4009I: System enters LXPM maintenance mode.
The system enters maintenance mode
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0226
User Action:
Information only; no action is required.
• FQXSPSS4010I: Test Audit Log generated by user [arg1].
This message is for the use case where OS Crash Video Capture Failed.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0237
User Action:
Information only; no action is required.
• FQXSPSS4011I: Fan speed boost setting is changed from [arg1] to [arg2].
The setting of fan speed boost is changed.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0254
User Action:
Information only; no action is required.
• FQXSPTR4000I: Management Controller [arg1] clock has been set from NTP server [arg2].
This message is for the use case where a Management Controller clock has been set from the Network
Time Protocol server.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0033
User Action:
Complete the following steps until the problem is solved:
1. Make sure that the certificate that you are importing is correct.
Chapter 2. XClarity Controller events 149
To Next Page
Loading...
