Need help?Do you have a question about the Lenovo ThinkSystem SD530 V3 and is the answer not in the manual?
General| Product Type | Server |
|---|---|
| Processor | Intel Xeon Scalable processors |
| Processor Sockets | 2 |
| Drive Bays | 4 x 3.5" |
| Power Supply | 1600W |
| RAID Support | RAID 0, 1, 10, 5, 50, 6, 60 |
| Operating System Support | Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware |
Key design features for customization and expansion capabilities.
Summary of chassis and node features and specifications.
Controls, LEDs, and connectors on the front of the D3 Chassis and SD530 V3 node.
Controls and connectors on the rear of the D3 Chassis and SD530 V3 node.
Information on available system LEDs and diagnostics display for troubleshooting.
Instructions to identify the system and locate XClarity Controller access information.
General procedures for setting up the system hardware.
Procedures to configure the system.
Checklist to identify potentially unsafe conditions with the system.
Procedures for removing or installing a SD530 V3 node from or to the D3 Chassis.
Procedures for removing or installing a memory module.
Procedures for removing or installing a processor and heat sink module (PHM).
Specify how Lenovo XClarity Controller connects to the network.
Options available to update the firmware for the system.
Information on available system LEDs and diagnostics display for troubleshooting.
Section to resolve issues related to memory.
Follow instructions to disassemble the node before recycling the node tray.
Steps to take before contacting support to resolve a problem.
Procedures to solve problems without outside assistance.
Introduction and download links for handy documents.
Driver and firmware downloads and support resources.
To Next Page
