Lenovo ThinkSystem SD530 V3 - System LEDs and diagnostics display

Table 15. SW5 switch block definition (continued)
Switch
number
Switch name
Usage description
On Off
7
BMC force update
Forces XCC boot
Normal (default)
8
FPGA power permission
override
Ignores Power Permission and allows
system to power on
Normal (default)
SW13 switch block
Table 16. SW13 switch block definition
Switch
number
Switch name
Usage description
On Off
1
(Reserved) (Reserved) Normal (default)
2
Debug Atscale
Forces to enable the Atscale feature
Normal (default)
3
RTS (Real time clock)
reset
Clears CMOS data
Normal (default)
4 FPGA MFG mode Enables FPGA MFG mode
Normal (default)
5
Serial select
Normal (default)
Sends uEFI debug message to serial
port
Sends the XCC to serial port
6
(Reserved) (Reserved) Normal (default)
7
Bypass PFR Enables bypass PFR Normal (default)
8
BMC Trusted Platform
Module (TPM) physical
presence
Asserts TPM physical presence Normal (default)
System LEDs and diagnostics display
The following section provides information on available system LEDs and diagnostics display.
For more information, refer to
“Troubleshooting by system LEDs and diagnostics display” on page 205.
30
ThinkSystem SD530 V3 User Guide