Lenovo ThinkSystem SD530 V3 - Install the Chassis to the Rack

Figure 17. Chassis removal
Step 4. Carefully lay the chassis on a flat, static-protective surface.
After this task is completed
1. To remove the rails from the rack, follow the instructions below:
https://pubs.lenovo.com/st650-v2/thinksystem_l_shaped_rail_kit.pdf
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install the chassis to the rack
Follow instructions in this section to install the chassis to the rack.
About this task
To avoid potential danger, make sure to read and follow the safety information.
R006
54 ThinkSystem SD530 V3 User Guide