Table 2. Events organized by severity (continued)
Event ID
Message String Severity
FQXSPSE4045I The Salt of user [arg1] third-party password has been [arg2] by user
[arg3] from [arg4] at IP address [arg5].
Informational
FQXSPSE4046I The third-party password of the user [arg1] has been retrieved by user
[arg2] from [arg3] at IP address [arg4].
Informational
FQXSPSE4047I Role [arg1] is [arg2] and assigned with custom privileges [arg3][arg4]
[arg5][arg6][arg7][arg8][arg9][arg10][arg11] by user [arg12] .
Informational
FQXSPSE4048I Role [arg1] is removed by user [arg2]. Informational
FQXSPSE4049I Role [arg1] is assigned to user [arg2] by user [arg3]. Informational
FQXSPSE4050I [arg1] sent IPMI command from [arg2], raw data: [arg3][arg4][arg5]. Informational
FQXSPSE4051I Management Controller [arg1] joined the neighbor group [arg2] by
user [arg3] at IP address [arg4].
Informational
FQXSPSE4052I The password of neighbor group [arg1] is modified by [arg2] [arg3] at
IP address [arg4].
Informational
FQXSPSE4053I Management Controller [arg1] left the neighbor group [arg2] by user
[arg3] at IP address [arg4].
Informational
FQXSPSE4054I IPMI SEL wrapping mode is [arg1] by user [arg2] at IP address [arg3]. Informational
FQXSPSE4055I SED encryption is enabled by user [arg1] at IP address [arg2]. Informational
FQXSPSE4056I SED AK is [arg1] by user [arg2] at IP address [arg3]. Informational
FQXSPSE4057I User [arg1] created by user [arg2] from [arg3] at IP address [arg4]. Informational
FQXSPSE4058I User [arg1] removed by user [arg2] from [arg3] at IP address [arg4]. Informational
FQXSPSE4059I User [arg1] password modified by user [arg2] from [arg3] at IP address
[arg4].
Informational
FQXSPSE4060I User [arg1] role set to [arg2] by user [arg3] from [arg4] at IP address
[arg5].
Informational
FQXSPSE4061I User [arg1] custom privileges set: [arg2][arg3][arg4][arg5][arg6][arg7]
[arg8][arg9] by user [arg10] from [arg11] at IP address [arg12].
Informational
FQXSPSE4062I The system guard snapshot is captured by user [arg1] from [arg2] at
IP address [arg3].
Informational
FQXSPSE4063I The system guard configuration is updated: status=[arg1], hardware
inventory=[arg2] and action=[arg3] by user [arg4] from [arg5] at IP
address [arg6].
Informational
FQXSPSE4064I SNMPv3 engine ID is changed from [arg1] to [arg2] by user [arg3] from
[arg4] at IP address [arg5].
Informational
FQXSPSE4065I SFTP [arg1] by user [arg2] from [arg3] at IP address [arg4]. Informational
FQXSPSE4066I Security mode is modified from [arg1] to [arg2] by user [arg3] from
[arg4] at IP address [arg5].
Informational
FQXSPSE4067I User [arg1] accessible interfaces is set to [arg2][arg3][arg4][arg5][arg6]
by user [arg7] from [arg8] at IP address [arg9].
Informational
FQXSPSE4068I Security: Userid: [arg1] using [arg2] had [arg3] login failures from
Redfish client at IP address [arg4].
Informational
Chapter 2. XClarity Controller events 21
To Next Page
Loading...
