The forward/reverse switch must not be on either mode when charging.
Charging time is 8 – 12 hours. The first hour of charging can get back 60% of the battery’s energy
back. You may leave it to charge overnight, but NEVER continuously over 20 Hours. Otherwise you
will shorten the batteries life.
It is normal for the battery to be warm when charging.
The ride-on must be charged prior to its first use.
Working AC voltage is 220V (or 110V) (+/-10%).
3. CHARGING THE BATTERY:
Insert the plug of the charger into the charging socket which is on the main body of the ride-on its
underside (1).
Connect the charger to the ride-on first, and then connect the plug to power (2). Please note, the
ride-on cannot be driven when charging.
Do not insert any metal pieces into the charging hole as to avoid short circuiting and any damage
to the electro circuit.
To Next Page
Loading...
