When radio stations have been scanned in and saved, use the previous and next buttons on the
speaker or remote control to change to a different radio station. If you know the saved position
number of a radio station you want to listen to, enter that position number using the remote control
and the radio will go to that position number.
Bluetooth:
Open the Bluetooth settings on your Bluetooth device (e.g.: smart phone). Look for the Bluetooth
name BT9350 and pair.
Begin music playback from the Bluetooth device.
USB:
Add a USB stick to the USB port. The speaker will detect that a USB stick has been added and will
begin music playback from it. The speaker will only playback MP3 music files on the stick. It can not
read MP4 music files.
TF card:
Add a memory card to the TF card slot on the speaker. The speaker will detect that a memory card
has been added and will begin music playback from it. The speaker will only playback MP3 music
files on the card. It can not read MP4 music files.
USB (2A) PORT
This speaker has the capability to re-charge a device (e.g.: smart phone, MP3 player) through this
port. Connect the USB end of the charge lead for the device to the USB (2A) port and the other end
to the device.
MICROPHONE
Connect your own microphone into the MIC socket on the speaker to sing along to your music
tracks. Microphone is not included.
Use the M.V – and M.V + buttons on the remote control to adjust the microphone volume.
Use the Echo – and Echo + buttons on the remote control to adjust the microphone echo.
BASS AND TREBLE
During music playback, turn the bass and treble knobs to adjust the bass and treble level.
CONNECTING A BATTERY TO THE REAR OF THE SPEAKER
There is the option to connect an external battery to the rear of the unit through the black and red
spring clips located on the rear panel of the speaker.
The battery is not included. The wires for connection are not included.
The battery required is 15V – 22V.
To Next Page
Loading...