sounds from USB/SD.
3. To pause recording, press the Pause button. Press it again to resume recording.
4. To stop recording, press the Stop/Eject button.
PHONO to TAPE
1. Press the Phono/AUX/BT button and set the unit to phono mode.
2. Lower the tone arm to start playback of the record.
3. Insert a cassette tape and press the RECORD and PLAY button (for Cassette) to record the
sounds from record.
4. To pause recording, press the Pause button. Press it again to resume recording.
5. To stop recording, press the Stop/Eject button.
CD to TAPE
1. Press the CD button to set the unit to CD mode.
2. Insert and play a CD.
3. Insert a cassette tape and press the RECORD and PLAY button (for Cassette) to record the
sounds from the CD.
4. To recording, press the Pause button. Press it again to resume recording.
5. To stop recording, press the Stop/Eject button.
AUX IN to TAPE
1. Connect the 3.5mm auxiliary cable between your audio device and the Aux in Jack of this
unit
2. Press the Phono/AUX/BT button to set to Aux In mode and start playing.
3. Insert a cassette tape, and press the RECORD and PLAY button (for Cassette) to record the
sounds from your audio device
4. To pause recording, press the Pause button. Press it again to resume recording.
5. To stop recording, press the Stop/Eject button.
Bluetooth to TAPE
1. Press the Phono/AUX/BT button and set the unit to Bluetooth mode.
2. Turn on the Bluetooth feature of your audio device, search for “CD114” and pair.
3. Play and stream music from your device to the unit.
4. Insert a cassette tape and press the RECORD and PLAY button (for Cassette) to record the
sounds from the Bluetooth device.
5. To pause recording, press the Pause button. Press it again to resume recording.
6. To stop recording, press the Stop/Eject button.
Note: To prevent accidental recording, break off the
cassette tab from side A or B.
To Next Page
