Lenoxx CD114BL - USB and SD Card Operation; Connecting and Playing Media

4. Press the delete DEL button again to confirm.
5. “DELETE” will show on the display while the files/tracks are being deleted until the
deletion is complete.
USB/SD RECORDING:
The recording format is preset at MP3 bit rate 128 kbps.
RADIO to USB/SD RECORDING
1. Press the AM or FM button to the desired band.
2. Insert a USB device or an SD memory card and press the record button.
3. Press the Backward or Forward Skip button to select USB or SD for recording and press the
record button to confirm the desired media.
4. When you have finished recording, press the Stop button.
CASSETTE to USB/SD RECORDING
1. Press the Tape button and set the unit to Tape Mode.
2. Insert a USB device or an SD memory card and press the record button.
3. Press the Backward or Forward Skip button to select USB or SD for recording and press the
record button to confirm the desired media.
4. Insert a cassette and press the play button.
5. When you have finished recording, press the Stop button.
PHONO to USB/SD RECORDING
1. Press the Phono/AUX/BT button and set the unit to Phono mode
2. Insert a USB device or an SD memory card and press the record button.
3. Press the Backward or Forward Skip button to select USB or SD for recording and press the
record button to confirm the desired media.
4. Put a vinyl record on the platter and follow the process to play the record.
5. When you have finished recording, press the Stop button.
CD to USB/SD RECORDING
1. Press the CD button and set the unit to CD mode.
2. Insert CD and press the stop button.
3. Insert a USB device or an SD memory card.
4. Press the record button. “ONE” will be shown on the screen to record the first song. Press
the Backward or Forward Skip button to select “ALL” and record the entire CD.
5. Press the record button to confirm when your selection of “ONE” or “ALL” is shown on the
screen.
6. Press the Backward or Forward Skip button to select USB or SD for recording and press the
record button to confirm the desired media.
7. When you have finished recording, press the Stop button.