OPERATION:
After assembly and charging:
Ensure the charger is removed from the charging socket on the ride-on.
Press the power switch to turn the ride-on on.
Put the ride-on into forward or backward mode by pushing the forward/stop/backward switch to
either forward or backwards.
Push on the foot pedal.
Use the horn and music buttons on the steering wheel for sound.
To stop, stop pressing the foot pedal. When the ride on has come to a complete stop, move the
forward/stop/backward switch to the stop position.
Press the power switch to turn off the ride-on.
MAINTENCE AND TROUBLE SHOOTING:
Factors which may influence the ride-on’s performance and life span:
‐ How flat the driving surface is
‐ The weight of the driver
‐ Whether the battery has been fully charged
‐ Whether the motor ride-on is regularly used
‐ Whether water or any other liquid has eroded the electrical components
CLEANING:
Clean the motor ride-on with a soft dry cloth. Do not use any wax or spray liquids for cleaning. It
could erode the power switch.
STORAGE:
Do not store the ride-on in an area of high temperature, humidity or near flames. When raining or
snowing, keep the ride-on under cover and out of the weather.
Do not change the batteries setting, as it can cause fire and damage the electrical circuit system. Do
not change the ride-on’s electrical circuit system. Any repairs done to this unit must be carried out
by authorised and qualified service personnel.
Do not allow children to charge the ride-on, play with the battery or motor.
If the ride-on will not be used for a long period of time (3 months or longer), it is advised that you
fully charge the battery and disconnect it from the connections.
A long period of non-use will damage the battery. It is advised that the battery should be charged
once a month, even if the ride-on is not being used.
A new battery must be fully charged before its first use.
To Next Page
Loading...