Lenoxx KB922 - Vibrato; Transpose and Tune; Double Keyboard; Record and Playback

● Vibrato
Press the [Vibrato] button with “VIB” appearing on the display, the sound of the
keystrokes takes on a vibrato effect. Press the button again with "VIB" disappearing,
the function quits.
● Transpose
Press the [Transpose+/-] button to transpose the tone of the notes. The transpose
may be adjusted from”-6” to “+6”. Apply the both buttons at the same time, the
notes turns normal to the preset stage “0”.
● Tune
Press the [Tune+/-] button to accurately correct the pitch from “-99” to “+99”.
Press both buttons at the same time, the keyboard turns normal and the pitch turns
to the preset stage “0”.
● Double Keyboard
Press the [Split] button with “SPLIT” appearing on the display, the keyboard is
divided into two parts, the 24 keys on the left and the rest keys, to form a double
keyboard. The timbre of the two parts can be different. The left part keeps the
primary timbre but the right part can gain another timbre. Meanwhile, the pitch of
the left part reses by 8 degrees while that of the right part falls by 8 degrees, that is,
the pitch of the two parts become consistent. Press the [Split] button again, the
function quits.
Also, this function will exit when the auto-chord works.
VII. Record and Playback
● Record
Press the [Rec] button with the auto beats following and “RECORD “appearing
on the display. In this state, all notes that are played can be recorded with the
automatic beats. The new record will take the place of the primary one when this
function is applied again or when the program function is on.
P7