Lenz Digital Plus LK200 - LK200 Operating Status Indicators

27
E
5 Operating display
Two LEDs indicate the operating status of the LK200.
If the yellow LED is on, the output terminals "J" and "K" have the same polarity as the input
terminals "J" and "K".
yellow LED is on
IN
connected to
OUT
J
J
K
K
If the green LED is on, the output terminals "J" and "K" have the reverse polarity as the input
terminals "J" and "K".
green LED is on
IN
connected to
OUT
J
J
K
K
If neither of the two LEDs is on, no track voltage is applied at input J, K.