Lenz Digital plus LW130 User Manual

LT100 Digital Circuit Breaker 1
DIGITAL plus
+ LW130 is the interface between tower
cab LW100 and displays on your control
panel.
+It only works in connection with tower
cab LW100
LW130
Output Board for LW100
Art. Nr. 25130
Revised, 12 00
What is the function of LW130:
The basic purpose of LW130 is to display feedback information.
For Example, this can be the position of turnouts, or the display of
occupied track blocks.

Lenz Digital plus LW130 Specifications

General

Brand	Lenz
Model	Digital plus LW130
Category	Control Unit
Language	English

Summary

LW130 Output Board

Functionality of LW130

Explains the basic purpose of the LW130 module, which is to display feedback information.

Prerequisites for Displaying Feedback

Installation Guide

Details on mounting the LW130 module, including screw usage and spacer recommendations.

Connecting to LW100

Instructions for connecting the LW130 module to the LW100 using the 'GZIO' terminals.

Connecting Power Supply

Guidance on connecting the required 10-16V AC or DC power supply to the LW130.

Output Current Limits

Calculating Current Draw

Method for determining the total current draw of the LW130 based on connected components.

Feedback Information Organization

Setting the Group Address

Explains how to set the LW130's group address using DIP switches for feedback display.

Connecting Displays

Connecting Light Bulbs

Instructions for connecting light bulbs to the LW130 outputs, noting polarity and current limits.

Connecting LEDs

Guide for connecting LEDs to the LW130, including resistor requirements and polarity.

Display Control Panel Components