Need help?Do you have a question about the Lenze ESV222N04TXB571 and is the answer not in the manual?
Details items included with the SMV inverter and initial checks.
Lists other relevant documentation for the SMVector frequency inverter.
Covers general risks, personnel qualifications, and environmental considerations.
Addresses handling, static sensitivity, environmental conditions, and standards compliance.
Emphasizes adherence to national safety regulations and EMC compliance.
Warns against using the drive as a safety device and highlights protection features.
Policy statement regarding warranty and liability for explosion-proof motor applications.
Explains signal words (Danger, Warning, Note) and their meanings and consequences.
Information on harmonic current limitations and compliance with EN standards.
Specific safety information related to EN 61800-5-1 standards.
Safety notes pertaining to UL approved systems and integrated controllers.
Lists conformity, approvals, environmental, and operational conditions.
Provides a table detailing various SMVector inverter model numbers.
Presents detailed electrical and performance ratings for different voltage models.
Covers physical dimensions, mounting requirements, and conduit hole specifications.
Specific dimensions and mounting details for NEMA 1 IP31 models.
Guidelines for connecting the drive, including storage and power connections.
Procedure for safely operating the drive after extended storage.
Wiring diagram for 120VAC single-phase mains connection.
Wiring diagrams for 240VAC single-phase mains connections.
Wiring diagram for three-phase mains connections.
Guidelines for connecting the motor to the drive, including safety warnings.
Guidelines for ensuring electromagnetic compatibility during installation.
Recommendations for selecting appropriate fuses and cable sizes.
Details on connecting control signals and communication ports.
Explains the operation and indicators of the local keypad and display.
Describes how the drive display shows output frequency and other parameters.
Overview of how to set and change drive parameters.
Information on the EPM, its functions, and usage for parameter storage.
Introduction to the parameter menu structure and organization.
Details on fundamental parameters for drive configuration.
Configuration of digital and analog inputs/outputs.
Advanced settings for fine-tuning drive performance.
Parameters related to Proportional-Integral-Derivative (PID) control.
Parameters specific to Vector control mode for motor operation.
Configuration settings for communication protocols and network integration.
Parameters for monitoring drive status, faults, and operational data.
Monitoring control terminal status and drive conditions via LED indicators.
Monitoring keypad button status and LED indicators.
Details on using Modbus registers for advanced control and monitoring.
Explains drive status and warning messages for troubleshooting.
Lists and explains drive fault codes, causes, and remedies.
General notes and remarks for user reference.
To Next Page
General