Need help?Do you have a question about the Lenze ESV112N02YXB571 and is the answer not in the manual?
Covers general safety, installation, electrical, application, and operation guidelines.
Explains safety signals, explosion proof use, and harmonic notifications.
Details safety information in accordance with EN 61800-5-1 and UL.
Lists conformity, approvals, and operational environmental conditions.
Details model numbers and their corresponding specifications.
Provides detailed electrical specifications for various voltage and phase configurations.
Provides physical dimensions and mounting guidelines for NEMA 1 models.
Covers overall electrical installation, power connections, and safety.
Details specific connection types for mains and motor wiring.
Guidelines for shielded cables, filters, and proper installation for EMC.
Specifies fuses, cable cross-sections, and terminal functions.
Explains the keypad layout, buttons, and display indicators for operation.
Describes how the drive display shows output frequency and operational modes.
Introduces parameter setting and the Electronic Programming Module (EPM).
Details basic, I/O, advanced, PID, Vector, and Network setup parameters.
Covers diagnostic parameters, terminal/keypad status, and Modbus registers.
Lists and explains drive status and warning messages.
Explains the 4-digit codes indicating drive configuration.
Details common fault messages, causes, and troubleshooting steps.
To Next Page
General