Need help?Do you have a question about the Lenze ESV112N04TXB571 and is the answer not in the manual?
General| Rated Power | 1.1 kW |
|---|---|
| Output Power | 1.1 kW |
| Output Current | 3.2 A |
| Enclosure Rating | IP20 |
| Input Voltage | 400-480V AC |
| Communication Interface | CANopen |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature |
Safety for installation, electrical, application, and operation.
Safety for explosion proof apps, operation, notifications.
Safety requirements related to EN, UL, and EMC standards.
Conformity, approvals, and operating conditions.
Lists SMVector inverter models and their specifications.
Detailed electrical ratings for various voltage and phase configurations.
Physical dimensions and mounting guidelines for NEMA 1 models.
Procedures for connecting power and ensuring proper electrical installation.
Guidelines for connecting mains and motor power terminals.
Specific wiring diagrams for single-phase and three-phase mains connections.
Instructions for connecting the motor to the drive terminals.
Recommendations for shielded cables and installation for EMC compliance.
Recommended fuse types and cable sizes for different drive models.
Description of control terminal functions and connections.
Operation and functions of the local keypad and its display.
Understanding drive display indicators and operational modes.
Procedures for setting drive parameters via keypad and EPM.
Configuration of fundamental drive parameters like control source and frequency limits.
Configuration of digital and analog input/output signals.
Configuration of advanced parameters like voltage, frequency, and motor settings.
Setup and tuning of Proportional-Integral-Derivative control loops.
Configuration for Vector control mode, including motor data.
Configuration for communication protocols and network settings.
Parameters for monitoring drive status, faults, and operational data.
Registers for Modbus communication, including status and control words.
Lists and explains drive status and warning messages.
Explains drive configuration codes and stop source displays.
Lists and explains drive fault messages and their remedies.
To Next Page