Need help?Do you have a question about the Lenze ESV552N04TXB571 and is the answer not in the manual?
General| Product Type | DC Drive |
|---|---|
| Model | ESV552N04TXB571 |
| Manufacturer | Lenze |
| Protection Class | IP20 |
| Mounting | Wall mounting |
| Control Type | Vector Control |
| Communication Interface | CANopen |
| Ambient Temperature Range | 0...+45 °C |
| Storage Temperature Range | -25...+70 °C |
| Input Voltage | 3 x 400...480 VAC (-15/+10%) |
| Relative Humidity | <95 %, no condensation |
Covers general safety, installation, electrical, and application guidelines.
Addresses explosion proof use, operation safety, and warning signals.
Details EMC, EN, and UL compliance requirements.
Lists conformity, approvals, and operating environmental conditions.
Explains the model nomenclature for specific system integrations.
Provides detailed electrical specifications and performance data.
Outlines physical dimensions and recommendations for mounting the drive.
Detailed procedures for connecting the drive electrically.
Guidelines for meeting Electromagnetic Compatibility standards.
Recommendations for protective devices and wiring gauge selection.
Description of terminal connections for control signals.
Guide to using the local keypad for drive control and monitoring.
Explains how the drive display indicates status and operational modes.
Covers setting drive parameters and using the Electronic Programming Module.
Provides an overview of the drive's parameter menu structure.
Fundamental parameters for initial drive configuration.
Parameters for fine-tuning drive performance and features.
Configuration settings for Proportional-Integral-Derivative control loops.
Settings specific to Vector control mode operation.
Configuration for communication via network protocols.
Parameters for monitoring drive status and performance.
Interpreting status indicators on terminals and keypad.
Details on Modbus registers for advanced control and monitoring.
Explanation of registers for drive status word and fault codes.
Details on registers for drive state and digital input status.
Explanation of the network control word for communication.
Instructions for overriding the drive's display output.
Lists and explains various status and warning indicators.
Codes that indicate the drive's current configuration.
Comprehensive list and explanation of drive fault codes and remedies.
To Next Page