Need help?Do you have a question about the Lenze ESV751N01SXB571 and is the answer not in the manual?
General| Output current | 2.4 A |
|---|---|
| Output voltage | 3 x 230 VAC |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature |
| Humidity | 95% non-condensing |
| Mounting | Wall Mount |
Explains the manual's scope, model applicability, and related documents.
Covers risks, personnel qualifications, handling, environment, and application safety.
Details explosion proofing, safe operation, and notification icons for hazard awareness.
Explains EMC, harmonics, EN, and UL safety standards and requirements.
Details conformity, approvals, environmental specs, and EMC limits for operation.
Lists model numbers and their associated power ratings for identification.
Provides detailed electrical ratings, heat loss, and performance data for various models.
Specifies physical dimensions and mounting requirements for NEMA 1 models.
Covers power connections, mains wiring, motor connections, and safety.
Offers recommendations for installing shielded cables for EMC performance.
Recommends fuses, breakers, and cable cross-sections for safe installation.
Explains serial communication and control terminal wiring diagrams and functions.
Explains keypad operation, display indicators, and basic drive control functions.
Covers parameter adjustment, EPM functions, and data management.
Details basic setup, I/O, and essential operational parameters.
Covers advanced settings, PID loops, and Vector mode motor parameters.
Details diagnostic parameters, Modbus registers, and communication setup.
Lists and explains status/warning messages, their causes, and remedies.
Explains drive configuration codes and stop source displays for status checks.
Provides a comprehensive list of drive faults, causes, and corrective actions.
To Next Page