Configuration
Basic configurations
2.2.2 Speed control C0005 = 1XXX (1000)
2−8
l
EDSVS9332P−EXT DE 2.0
Selection of direction of rotation
The selection of direction of rotation results from the sign of the speed setpoint at the input
MCTRL−N−SET of the MCTRL function block.
In turn, the sign of this speed setpoint results from
l the sign of the main and additional setpoint,
l the level position at terminals E1 and E2,
l the selected link of the main and additional setpoint via the arithmetic block in the NSET
function block
To Next Page
Loading...
