Need help?Do you have a question about the Lenze EVS9323EP and is the answer not in the manual?
General| Control Voltage | 24 V DC |
|---|---|
| Protection Class | IP20 |
| Type | Inverter |
| Power Supply Voltage | 3-phase 380-480V AC |
| Communication Interface | CANopen, RS-485 |
Guidance on effectively using the system manual for optimal understanding.
Explains the meaning and usage of various notes and symbols in the manual.
Using the GDC software for configuring application-specific drive tasks.
Loading predefined configurations via code C0005 for initial setup.
Selecting operational modes and interfaces for parameter setting and control.
Customizing terminal assignments for inputs and outputs.
Explains how to configure the signal flow by connecting function blocks.
A comprehensive list of available function blocks with their descriptions and CPU times.
Lists free control codes used for setpoints or variables, connectable to function block inputs.
Core function block for controlling positioning tasks in servo controllers.
Detailed descriptions of all available function blocks and their parameters.
Demonstrates a dosing system application using servo position controllers.
Shows how to control a spray nozzle using absolute positioning.
Explains path control for multi-axis applications using the servo position controller.
Provides definitions for technical terms and abbreviations used in the manual.
Alphabetical listing of topics and their corresponding page numbers for easy reference.
To Next Page
