Quick start guide1
44
EDK94ASH24 ZH/EN 4.1
1 Quick start guide
How to proceed for the installation:
1. Read the safety instructions from page 45
2. Inform yourself about the technical data from page 51
3. Mount the installation backplane into the
control cabinet and wire it
from page 57
4. Insert the standard device into the
installation backplane
from page 58
5. Wire the standard device from page 59
6. Adjust and wire the device modules
– Wire the communication modules.
– Adjust the memory modules.
– Wire the safety modules.
from page 64
7. Final works from page 79
Tip!
Documentation and software updates for further Lenze products can be found
on the Internet in the "Services & Downloads" area under
http://www.Lenze.com
To Next Page
Loading...
