Need help?Do you have a question about the Lenze L-force and is the answer not in the manual?
General safety and application notes for Lenze motor starters, covering installation, operation, maintenance, and disposal.
Details potential hazards related to electrical contact, operation temperature, and motor protection.
Explains pictographs and signal words used to indicate dangers and important information.
Covers conformity, standards, EMC, enclosure, protective measures, and operating conditions.
Details rated data for different motor starter types, including motor, brake, control connections, and monitoring functions.
Provides detailed dimensional drawings and specifications for the motor starters.
Specifies the required clearances around the device for proper installation and ventilation.
Key safety and EMC considerations for electrical installation, including connector handling and earthing.
Illustrates the fundamental electrical connections and components of the motor starter.
Details pin assignment and data for mains power connection (X10) and 24 V DC supply (X11).
Specifies connections for motor 1 (X21) and motor 2 (X22), including temperature monitoring.
Provides instructions for implementing safety features and ensuring safe operation of the drives.
Details digital inputs, digital outputs, diagnostic interface, and manual operation.
Explains PROFIBUS input and output connections and network structure.
Provides a final note regarding unused connectors for safety engineering features.
To Next Page
General